[ May 29 14:40:22 Enabled. ]
[ May 29 14:40:22 Rereading configuration. ]
[ May 29 14:40:25 Rereading configuration. ]
[ May 29 14:40:28 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.013928416Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.025897017Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.035428869Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.039629592Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.043924677Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.50815093Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T14:40:29.52231988Z","hostname":"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb","pid":22816,"zonename":"\"oxz_crucible_4b7bc37f-154e-4292-84aa-546603c82dfb\""}
[ May 29 14:40:29 Method "start" exited with status 0. ]