[ May 29 18:21:37 Enabled. ]
[ May 29 18:21:37 Rereading configuration. ]
[ May 29 18:21:38 Rereading configuration. ]
[ May 29 18:21:39 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.163902963Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.170000977Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.179820954Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.184035326Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.188876718Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.652639409Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:40.665740342Z","hostname":"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c","pid":23225,"zonename":"\"oxz_crucible_11ddb415-4c86-422f-bc1f-09b9f27f767c\""}
[ May 29 18:21:40 Method "start" exited with status 0. ]