[ May 29 18:21:38 Enabled. ]
[ May 29 18:21:38 Rereading configuration. ]
[ May 29 18:21:40 Rereading configuration. ]
[ May 29 18:21:42 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:42.852791822Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:42.85852606Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:42.866388184Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:42.87090235Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:42.874728246Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:43.333329688Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:21:43.342741618Z","hostname":"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5","pid":24782,"zonename":"\"oxz_crucible_fe933c1f-28ca-4882-afc2-b1da826703e5\""}
[ May 29 18:21:43 Method "start" exited with status 0. ]