[ May 29 18:17:41 Enabled. ]
[ May 29 18:17:41 Rereading configuration. ]
[ May 29 18:17:42 Rereading configuration. ]
[ May 29 18:17:42 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService3 -s fd00:1122:3344:3::1 -g fd00:1122:3344:3::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:42.89347029Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278,"datalink":"oxControlService3"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:42.899307989Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278,"datalink":"oxControlService3"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:42.905640987Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:42.908452455Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:42.911445116Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278,"static address":"fd00:1122:3344:3::1","data link":"\"oxControlService3\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:43.365047663Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278,"gateway":"fd00:1122:3344:3::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:17:43.370568727Z","hostname":"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65","pid":5278,"zonename":"\"oxz_internal_dns_d8cb7096-365c-4128-9fec-d85a9e9f5f65\""}
[ May 29 18:17:43 Method "start" exited with status 0. ]