[ May 29 18:58:16 Enabled. ]
[ May 29 18:58:16 Rereading configuration. ]
[ May 29 18:58:18 Rereading configuration. ]
[ May 29 18:58:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.264115287Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.270017946Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.278385341Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.282093807Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.285455957Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.747682281Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T18:58:23.766763867Z","hostname":"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575","pid":24881,"zonename":"\"oxz_crucible_c5797235-5f06-49b3-8cb0-e4cff0efc575\""}
[ May 29 18:58:23 Method "start" exited with status 0. ]