[ May 29 19:43:29 Enabled. ]
[ May 29 19:43:29 Rereading configuration. ]
[ May 29 19:43:30 Rereading configuration. ]
[ May 29 19:43:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:32.836577674Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:32.849043955Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:32.864512431Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:32.870892593Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:32.878078328Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:33.337712604Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-05-29T19:43:33.349517355Z","hostname":"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21","pid":23459,"zonename":"\"oxz_crucible_fa165503-f965-4110-9759-cf9cfe4cfe21\""}
[ May 29 19:43:33 Method "start" exited with status 0. ]