[ Jun 11 14:53:44 Enabled. ]
[ Jun 11 14:53:44 Rereading configuration. ]
[ Jun 11 14:53:45 Rereading configuration. ]
[ Jun 11 14:53:48 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.1762328Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.185655303Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.198311952Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.203442549Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.209713697Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.670984839Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T14:53:48.681708086Z","hostname":"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5","pid":21452,"zonename":"\"oxz_crucible_48ef501a-77d5-4f58-8e6f-1f3c47c618b5\""}
[ Jun 11 14:53:48 Method "start" exited with status 0. ]