[ Jun 11 21:31:57 Enabled. ]
[ Jun 11 21:31:57 Rereading configuration. ]
[ Jun 11 21:31:59 Rereading configuration. ]
[ Jun 11 21:32:03 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:03.897903875Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:03.909818558Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:03.925106501Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:03.930769004Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:03.939816686Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:04.399344935Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-11T21:32:04.411703004Z","hostname":"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8","pid":26998,"zonename":"\"oxz_oximeter_5692c284-93f4-4dff-8e7f-6c384f75dcd8\""}
[ Jun 11 21:32:04 Method "start" exited with status 0. ]