[ Jun 20 22:37:06 Enabled. ]
[ Jun 20 22:37:06 Rereading configuration. ]
[ Jun 20 22:37:09 Rereading configuration. ]
[ Jun 20 22:37:14 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.020985999Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.025896071Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.033101756Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.036442728Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.039801541Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.497004856Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-20T22:37:15.504805612Z","hostname":"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47","pid":24976,"zonename":"\"oxz_oximeter_4caf448b-60f3-484e-aba9-be4f8b4fdf47\""}
[ Jun 20 22:37:15 Method "start" exited with status 0. ]