[ Jun 22 18:37:43 Enabled. ]
[ Jun 22 18:37:43 Rereading configuration. ]
[ Jun 22 18:37:46 Rereading configuration. ]
[ Jun 22 18:37:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:52.967852835Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:52.971964972Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:52.978856478Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:52.982025385Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:52.984967307Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:53.442544269Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T18:37:53.451900777Z","hostname":"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5","pid":25237,"zonename":"\"oxz_oximeter_0a67a55d-33d8-4aa5-9289-c5773fa583f5\""}
[ Jun 22 18:37:53 Method "start" exited with status 0. ]