[ Jun 22 21:13:11 Enabled. ]
[ Jun 22 21:13:11 Rereading configuration. ]
[ Jun 22 21:13:14 Rereading configuration. ]
[ Jun 22 21:13:19 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:19.545566497Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:19.553029761Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:19.562040257Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:19.566212217Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:19.569941174Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:20.030283716Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-22T21:13:20.040933793Z","hostname":"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70","pid":23677,"zonename":"\"oxz_crucible_3f135ff2-b3ce-4507-9c5b-86a912ecba70\""}
[ Jun 22 21:13:20 Method "start" exited with status 0. ]