[ Jun 23 22:55:28 Enabled. ]
[ Jun 23 22:55:28 Rereading configuration. ]
[ Jun 23 22:55:30 Rereading configuration. ]
[ Jun 23 22:55:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:36.847635033Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:36.853105367Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:36.86214457Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:36.867391407Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:36.871573614Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:37.328622195Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-23T22:55:37.337913435Z","hostname":"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541","pid":26892,"zonename":"\"oxz_oximeter_26fdb619-6753-40d1-aec4-c7353c5b5541\""}
[ Jun 23 22:55:37 Method "start" exited with status 0. ]