[ Jun 29 20:30:12 Enabled. ]
[ Jun 29 20:30:12 Rereading configuration. ]
[ Jun 29 20:30:14 Rereading configuration. ]
[ Jun 29 20:30:17 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.013209322Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.022280639Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.034580308Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.040376193Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.045948923Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.507031912Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-29T20:30:18.518958881Z","hostname":"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18","pid":27698,"zonename":"\"oxz_oximeter_513676fe-bc97-4806-b791-3bd96aee7f18\""}
[ Jun 29 20:30:18 Method "start" exited with status 0. ]