[ Jun 30 21:26:07 Enabled. ]
[ Jun 30 21:26:07 Rereading configuration. ]
[ Jun 30 21:26:09 Rereading configuration. ]
[ Jun 30 21:26:17 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.092000804Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.096119882Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.104189677Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.108226334Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.111798902Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.572570066Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-06-30T21:26:18.583674648Z","hostname":"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9","pid":24062,"zonename":"\"oxz_crucible_15dba298-9b11-4cbf-b1c0-ed7a870afbf9\""}
[ Jun 30 21:26:18 Method "start" exited with status 0. ]