[ Jul  2 03:42:52 Enabled. ]
[ Jul  2 03:42:52 Rereading configuration. ]
[ Jul  2 03:42:53 Rereading configuration. ]
[ Jul  2 03:42:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService3 -s fd00:1122:3344:2::1 -g fd00:1122:3344:2::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:53.988093194Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256,"datalink":"oxControlService3"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:53.994280745Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256,"datalink":"oxControlService3"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:54.00151794Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:54.005253786Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:54.00894117Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256,"static address":"fd00:1122:3344:2::1","data link":"\"oxControlService3\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:54.463162305Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256,"gateway":"fd00:1122:3344:2::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-02T03:42:54.468761673Z","hostname":"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf","pid":5256,"zonename":"\"oxz_internal_dns_95efc1a9-e93f-4207-a09c-7ef06ff8d2cf\""}
[ Jul  2 03:42:54 Method "start" exited with status 0. ]