[ Jul  4 15:31:18 Enabled. ]
[ Jul  4 15:31:18 Rereading configuration. ]
[ Jul  4 15:31:22 Rereading configuration. ]
[ Jul  4 15:31:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:27.938991393Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:27.945067147Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:27.953167262Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:27.956993614Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:27.960835867Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:28.417122381Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-04T15:31:28.426829215Z","hostname":"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2","pid":27338,"zonename":"\"oxz_oximeter_be0a7162-6fc5-499b-bcf5-5467164115b2\""}
[ Jul  4 15:31:28 Method "start" exited with status 0. ]