[ Jul  8 18:43:19 Enabled. ]
[ Jul  8 18:43:19 Rereading configuration. ]
[ Jul  8 18:43:20 Rereading configuration. ]
[ Jul  8 18:43:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.030765113Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.044881283Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.054164338Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.061419686Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.067181203Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.528481866Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-08T18:43:23.543015355Z","hostname":"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7","pid":21810,"zonename":"\"oxz_oximeter_7da69b21-d0e3-4f95-94a7-1bdb171727e7\""}
[ Jul  8 18:43:23 Method "start" exited with status 0. ]