[ Jul 10 22:52:10 Enabled. ]
[ Jul 10 22:52:10 Rereading configuration. ]
[ Jul 10 22:52:12 Rereading configuration. ]
[ Jul 10 22:52:16 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.297757012Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.304392776Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.313371473Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.318695331Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.324514897Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.783273688Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T22:52:16.791392505Z","hostname":"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af","pid":25762,"zonename":"\"oxz_oximeter_f3f82797-bd4a-4a66-a849-9e4e44c1e4af\""}
[ Jul 10 22:52:16 Method "start" exited with status 0. ]