[ Jul 10 23:22:09 Enabled. ]
[ Jul 10 23:22:09 Rereading configuration. ]
[ Jul 10 23:22:14 Rereading configuration. ]
[ Jul 10 23:22:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.180102547Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.18504618Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.191452734Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.195541329Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.198664293Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.654880643Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-10T23:22:22.6643658Z","hostname":"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986","pid":23755,"zonename":"\"oxz_oximeter_489cca6d-7d17-405f-a400-9d8f209b1986\""}
[ Jul 10 23:22:22 Method "start" exited with status 0. ]