[ Jul 16 13:13:56 Enabled. ]
[ Jul 16 13:13:56 Rereading configuration. ]
[ Jul 16 13:13:58 Rereading configuration. ]
[ Jul 16 13:14:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.338830148Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.353318042Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.363235134Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.367811717Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.373486482Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.840517118Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.857472952Z","hostname":"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4","pid":24156,"zonename":"\"oxz_crucible_64793f52-db0f-4771-848b-82649458c0d4\""}
[ Jul 16 13:14:02 Method "start" exited with status 0. ]