[ Jul 16 13:13:56 Enabled. ]
[ Jul 16 13:13:56 Rereading configuration. ]
[ Jul 16 13:13:58 Rereading configuration. ]
[ Jul 16 13:14:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.266377727Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.277070564Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.287481196Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.292326454Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.299047651Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.759438851Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:14:02.771632509Z","hostname":"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f","pid":24182,"zonename":"\"oxz_crucible_e3fe25c5-b66b-4619-95b8-e55c8cfe1e8f\""}
[ Jul 16 13:14:02 Method "start" exited with status 0. ]