[ Jul 16 13:11:11 Enabled. ]
[ Jul 16 13:11:11 Rereading configuration. ]
[ Jul 16 13:11:11 Rereading configuration. ]
[ Jul 16 13:11:12 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService1 -s fd00:1122:3344:1::1 -g fd00:1122:3344:1::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:12.73562952Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360,"datalink":"oxControlService1"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:12.741218564Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360,"datalink":"oxControlService1"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:12.749553663Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:12.753109125Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:12.756694098Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360,"static address":"fd00:1122:3344:1::1","data link":"\"oxControlService1\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:13.211095677Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360,"gateway":"fd00:1122:3344:1::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T13:11:13.216783053Z","hostname":"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717","pid":5360,"zonename":"\"oxz_internal_dns_009fdcd2-7009-4d9c-9fa8-b2b7ef5e9717\""}
[ Jul 16 13:11:13 Method "start" exited with status 0. ]