[ Jul 16 22:58:37 Enabled. ]
[ Jul 16 22:58:37 Rereading configuration. ]
[ Jul 16 22:58:38 Rereading configuration. ]
[ Jul 16 22:58:41 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.033160636Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.048672173Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.059789217Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.065459011Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.072920494Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.534114892Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-16T22:58:42.547094647Z","hostname":"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925","pid":22461,"zonename":"\"oxz_oximeter_d6f4375c-e245-4340-a898-9378fbb62925\""}
[ Jul 16 22:58:42 Method "start" exited with status 0. ]