[ Jul 17 01:57:44 Enabled. ]
[ Jul 17 01:57:44 Rereading configuration. ]
[ Jul 17 01:57:45 Rereading configuration. ]
[ Jul 17 01:57:48 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:48.49275045Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:48.502272123Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:48.518282441Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:48.524147934Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:48.529861776Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:48.99257114Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T01:57:49.006184886Z","hostname":"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88","pid":24691,"zonename":"\"oxz_crucible_25bd0648-8e60-442c-adc0-d2264fcaee88\""}
[ Jul 17 01:57:49 Method "start" exited with status 0. ]