[ Jul 17 19:40:55 Enabled. ]
[ Jul 17 19:40:55 Rereading configuration. ]
[ Jul 17 19:40:57 Rereading configuration. ]
[ Jul 17 19:40:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:40:59.959977303Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:40:59.96906814Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:40:59.979598868Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:40:59.98535576Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:40:59.990296861Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:00.450284635Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:00.460956517Z","hostname":"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4","pid":22203,"zonename":"\"oxz_crucible_60bf6eb6-f345-43da-b5ad-4928a0d6e9b4\""}
[ Jul 17 19:41:00 Method "start" exited with status 0. ]