[ Jul 17 19:41:00 Enabled. ]
[ Jul 17 19:41:00 Rereading configuration. ]
[ Jul 17 19:41:00 Rereading configuration. ]
[ Jul 17 19:41:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.430679335Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.437989177Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.447871398Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.452602233Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.457931114Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.915118135Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-17T19:41:02.924840154Z","hostname":"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342","pid":23515,"zonename":"\"oxz_oximeter_45ef5c3f-5516-4531-8876-a20f1c417342\""}
[ Jul 17 19:41:02 Method "start" exited with status 0. ]