[ Jul 20 20:09:47 Enabled. ]
[ Jul 20 20:09:47 Rereading configuration. ]
[ Jul 20 20:09:49 Rereading configuration. ]
[ Jul 20 20:09:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.39991137Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.405417502Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.416995457Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.424036637Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.429918256Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.88986915Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-20T20:09:52.89957923Z","hostname":"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e","pid":21673,"zonename":"\"oxz_oximeter_3d7489c2-70e9-4116-b7ef-775f34af735e\""}
[ Jul 20 20:09:52 Method "start" exited with status 0. ]