[ Jul 21 22:14:55 Enabled. ]
[ Jul 21 22:14:55 Rereading configuration. ]
[ Jul 21 22:14:57 Rereading configuration. ]
[ Jul 21 22:14:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:14:59.976639039Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:14:59.985898279Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:14:59.999074814Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:15:00.005211713Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:15:00.010462695Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:15:00.471827848Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-21T22:15:00.485702757Z","hostname":"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c","pid":20808,"zonename":"\"oxz_crucible_04f988c9-3b8b-4a91-b6b3-c0b27c48fe8c\""}
[ Jul 21 22:15:00 Method "start" exited with status 0. ]