[ Jul 22 16:15:55 Enabled. ]
[ Jul 22 16:15:55 Rereading configuration. ]
[ Jul 22 16:15:57 Rereading configuration. ]
[ Jul 22 16:16:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:02.905142352Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:02.912318727Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:02.924913332Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:02.931752439Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:02.937922168Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:03.397392261Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T16:16:03.407746518Z","hostname":"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c","pid":29329,"zonename":"\"oxz_crucible_1230f69d-4b3e-41cd-a005-d305f054fa4c\""}
[ Jul 22 16:16:03 Method "start" exited with status 0. ]