[ Jul 22 17:45:24 Enabled. ]
[ Jul 22 17:45:24 Rereading configuration. ]
[ Jul 22 17:45:27 Rereading configuration. ]
[ Jul 22 17:45:33 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.275845801Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.282752597Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.291478811Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.295422172Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.299450145Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.756314042Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T17:45:33.763773603Z","hostname":"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0","pid":28486,"zonename":"\"oxz_crucible_1d0da8ce-947e-4660-a155-8a2c3fe29dc0\""}
[ Jul 22 17:45:33 Method "start" exited with status 0. ]