[ Jul 22 18:17:19 Enabled. ]
[ Jul 22 18:17:19 Rereading configuration. ]
[ Jul 22 18:17:23 Rereading configuration. ]
[ Jul 22 18:17:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:26.829895387Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:26.841844824Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:26.852148773Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:26.859532884Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:26.866478085Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:27.323673619Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:17:27.332552655Z","hostname":"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f","pid":28203,"zonename":"\"oxz_crucible_04c91e42-8e09-4252-8a8e-054ef6848e6f\""}
[ Jul 22 18:17:27 Method "start" exited with status 0. ]