[ Jul 22 18:12:36 Enabled. ]
[ Jul 22 18:12:36 Rereading configuration. ]
[ Jul 22 18:12:36 Rereading configuration. ]
[ Jul 22 18:12:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:37.634461766Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443,"datalink":"oxControlService4"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:37.639458502Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443,"datalink":"oxControlService4"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:37.646298901Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:37.649117276Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:37.65189557Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443,"static address":"fd00:1122:3344:101::1b","data link":"\"oxControlService4\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:38.105280817Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-22T18:12:38.111174624Z","hostname":"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb","pid":6443,"zonename":"\"oxz_ntp_bf0a9baf-e97f-4a63-a3a9-1ef8c2857dfb\""}
[ Jul 22 18:12:38 Method "start" exited with status 0. ]