[ Jul 24 21:43:26 Enabled. ]
[ Jul 24 21:43:26 Rereading configuration. ]
[ Jul 24 21:43:27 Rereading configuration. ]
[ Jul 24 21:43:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:30.612397346Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:30.622721844Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:30.635499837Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:30.641755709Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:30.649106321Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:31.109493018Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-24T21:43:31.120264178Z","hostname":"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710","pid":22074,"zonename":"\"oxz_crucible_ff799a11-cc7c-41ee-961e-fcd50dfb6710\""}
[ Jul 24 21:43:31 Method "start" exited with status 0. ]