[ Jul 28 03:12:44 Enabled. ]
[ Jul 28 03:12:44 Rereading configuration. ]
[ Jul 28 03:12:46 Rereading configuration. ]
[ Jul 28 03:12:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:51.604658401Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:51.610452456Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:51.619795567Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:51.624736749Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:51.629280151Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:52.086779066Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-28T03:12:52.096537997Z","hostname":"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0","pid":25125,"zonename":"\"oxz_crucible_d66c0a21-762f-479a-885f-136e5da980b0\""}
[ Jul 28 03:12:52 Method "start" exited with status 0. ]