[ Jul 29 08:02:46 Enabled. ]
[ Jul 29 08:02:46 Rereading configuration. ]
[ Jul 29 08:02:47 Rereading configuration. ]
[ Jul 29 08:02:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.401809817Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.408085913Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.418513872Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.422181415Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.426458461Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.888929756Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T08:02:52.8991229Z","hostname":"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e","pid":24926,"zonename":"\"oxz_crucible_090ce1be-e84f-4c5e-8267-474e7b5edd9e\""}
[ Jul 29 08:02:52 Method "start" exited with status 0. ]