[ Jul 29 21:28:22 Enabled. ]
[ Jul 29 21:28:22 Rereading configuration. ]
[ Jul 29 21:28:23 Rereading configuration. ]
[ Jul 29 21:28:25 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.208456543Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.216154324Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.241618384Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.246797245Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.251748873Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.721049148Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-29T21:28:25.735984342Z","hostname":"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4","pid":22366,"zonename":"\"oxz_oximeter_fa84a12f-09b4-438f-8dee-6b54032162b4\""}
[ Jul 29 21:28:25 Method "start" exited with status 0. ]