[ Jul 30 03:24:48 Enabled. ]
[ Jul 30 03:24:48 Rereading configuration. ]
[ Jul 30 03:24:49 Rereading configuration. ]
[ Jul 30 03:24:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.365128921Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.374502667Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.391747766Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.397406745Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.406658889Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.869286221Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-07-30T03:24:52.882207193Z","hostname":"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7","pid":23550,"zonename":"\"oxz_oximeter_9e4c22d6-b123-4912-ba7c-70f8159cdda7\""}
[ Jul 30 03:24:52 Method "start" exited with status 0. ]