Building configuration...

Current configuration:
!
frr version 10.3
frr defaults traditional
hostname cr1
log syslog informational
no ip forwarding
no ipv6 forwarding
service integrated-vtysh-config
!
interface enp0s8
 ip address 10.0.0.2/24
 ipv6 address fd00:1::2/64
exit
!
bfd
 peer fd00:1::1 local-address fd00:1::2
  transmit-interval 1000
  receive-interval 1000
 exit
 !
 peer 10.0.0.1 local-address 10.0.0.2
  transmit-interval 1000
  receive-interval 1000
 exit
 !
exit
!
end
BFD Peers:
	peer 10.0.0.1 local-address 10.0.0.2 vrf default
		ID: 3240393501
		Remote ID: 2900926892
		Active mode
		Status: up
		Uptime: 3 second(s)
		Diagnostics: ok
		Remote diagnostics: ok
		Peer Type: configured
		RTT min/avg/max: 0/0/0 usec
		Local timers:
			Detect-multiplier: 3
			Receive interval: 1000ms
			Transmission interval: 1000ms
			Echo receive interval: 50ms
			Echo transmission interval: disabled
		Remote timers:
			Detect-multiplier: 3
			Receive interval: 1000ms
			Transmission interval: 1000ms
			Echo receive interval: disabled

	peer fd00:1::1 local-address fd00:1::2 vrf default
		ID: 569359654
		Remote ID: 3936731179
		Active mode
		Status: up
		Uptime: 3 second(s)
		Diagnostics: ok
		Remote diagnostics: ok
		Peer Type: configured
		RTT min/avg/max: 0/0/0 usec
		Local timers:
			Detect-multiplier: 3
			Receive interval: 1000ms
			Transmission interval: 1000ms
			Echo receive interval: 50ms
			Echo transmission interval: disabled
		Remote timers:
			Detect-multiplier: 3
			Receive interval: 1000ms
			Transmission interval: 1000ms
			Echo receive interval: disabled