Building configuration...

Current configuration:
!
frr version 10.3
frr defaults traditional
hostname cr1
log syslog informational
service integrated-vtysh-config
!
ip route 1.2.3.0/24 Null0
ipv6 route fd99::/64 Null0
!
router bgp 44
 no bgp ebgp-requires-policy
 timers bgp 2 6
 neighbor enp0s8 interface remote-as external
 neighbor enp0s8 timers connect 1
 !
 address-family ipv4 unicast
  network 1.2.3.0/24
 exit-address-family
 !
 address-family ipv6 unicast
  network fd99::/64
  neighbor enp0s8 activate
 exit-address-family
exit
!
end

IPv4 Unicast Summary:
BGP router identifier 10.151.6.168, local AS number 44 VRF default vrf-id 0
BGP table version 1
RIB entries 1, using 128 bytes of memory
Peers 1, using 23 KiB of memory

Neighbor        V         AS   MsgRcvd   MsgSent   TblVer  InQ OutQ  Up/Down State/PfxRcd   PfxSnt Desc
enp0s8          4          0         0         0        0    0    0    never         Idle        0 N/A

Total number of neighbors 1
BGP table version is 1, local router ID is 10.151.6.168, vrf id 0
Default local pref 100, local AS 44
Status codes:  s suppressed, d damped, h history, u unsorted, * valid, > best, = multipath,
               i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes:  i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
 *>  1.2.3.0/24       0.0.0.0                  0         32768 i

Displayed 1 routes and 1 total paths
% Unknown command:                 show ipv6 bgp