[ Aug 10 20:07:56 Enabled. ]
[ Aug 10 20:07:56 Rereading configuration. ]
[ Aug 10 20:07:59 Rereading configuration. ]
[ Aug 10 20:08:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.264727683Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.264965125Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.272786762Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.276831267Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.281415735Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.745630785Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-10T20:08:03.765135504Z","hostname":"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67","pid":25708,"zonename":"\"oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67\""}
[ Aug 10 20:08:03 Method "start" exited with status 0. ]