| 1 | | [ Aug 10 20:07:56 Enabled. ] |
| 2 | | [ Aug 10 20:07:56 Rereading configuration. ] |
| 3 | | [ Aug 10 20:07:59 Rereading configuration. ] |
| 4 | | [ Aug 10 20:08:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-10T20:08:03.264Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService11
|
| 7 | 2026-08-10T20:08:03.264Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService11
|
| 8 | 2026-08-10T20:08:03.272Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-10T20:08:03.276Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-10T20:08:03.281Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService11"
static address = fd00:1122:3344:101::18
|
| 11 | 2026-08-10T20:08:03.745Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-10T20:08:03.765Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_1b4f8f50-8635-4a8d-8b08-3f5cf3c59d67"
|
| 13 | | [ Aug 10 20:08:03 Method "start" exited with status 0. ] |