[ Aug 11 21:42:32 Enabled. ]
[ Aug 11 21:42:32 Rereading configuration. ]
[ Aug 11 21:42:33 Rereading configuration. ]
[ Aug 11 21:42:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.063869498Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.075074812Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.088151237Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.095350903Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.101089028Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.563434405Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.575744623Z","hostname":"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3","pid":23195,"zonename":"\"oxz_crucible_cb3ce54a-99d4-4fdb-a214-30de2e59bee3\""}
[ Aug 11 21:42:37 Method "start" exited with status 0. ]