[ Aug 11 21:42:32 Enabled. ]
[ Aug 11 21:42:32 Rereading configuration. ]
[ Aug 11 21:42:33 Rereading configuration. ]
[ Aug 11 21:42:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.106482405Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.115606244Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.128975935Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.136742014Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.143820648Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.607199537Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-11T21:42:37.618611176Z","hostname":"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b","pid":23209,"zonename":"\"oxz_oximeter_2cf2bf1b-e524-4f84-affd-2973f3dfa91b\""}
[ Aug 11 21:42:37 Method "start" exited with status 0. ]