[ Aug 12 05:32:49 Enabled. ]
[ Aug 12 05:32:49 Rereading configuration. ]
[ Aug 12 05:32:50 Rereading configuration. ]
[ Aug 12 05:32:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.074338989Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.087318471Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.098793658Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.103898981Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.110759364Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.577168027Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-12T05:32:54.588601834Z","hostname":"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02","pid":22331,"zonename":"\"oxz_oximeter_39456410-6adb-495d-b83f-67b815e36e02\""}
[ Aug 12 05:32:54 Method "start" exited with status 0. ]