[ Aug 13 01:38:40 Enabled. ]
[ Aug 13 01:38:40 Rereading configuration. ]
[ Aug 13 01:38:40 Rereading configuration. ]
[ Aug 13 01:38:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService5 -s fd00:1122:3344:101::4 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.407885867Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153,"datalink":"oxControlService5"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.41347151Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153,"datalink":"oxControlService5"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.42378034Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.427955408Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.432556033Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153,"static address":"fd00:1122:3344:101::4","data link":"\"oxControlService5\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.886962373Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T01:38:51.895041892Z","hostname":"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3","pid":10153,"zonename":"\"oxz_cockroachdb_4c1ef5db-657f-440a-88bc-e14adb8bddd3\""}
[ Aug 13 01:38:51 Method "start" exited with status 0. ]