| 1 | | [ Aug 13 21:28:29 Enabled. ] |
| 2 | | [ Aug 13 21:28:29 Rereading configuration. ] |
| 3 | | [ Aug 13 21:28:30 Rereading configuration. ] |
| 4 | | [ Aug 13 21:28:33 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-13T21:28:34.023Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService10
|
| 7 | 2026-08-13T21:28:34.035Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService10
|
| 8 | 2026-08-13T21:28:34.048Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-13T21:28:34.055Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-13T21:28:34.062Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService10"
static address = fd00:1122:3344:101::13
|
| 11 | 2026-08-13T21:28:34.527Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-13T21:28:34.538Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_0ce9e2d6-28b8-41cf-a86e-30bb84f4cb3d"
|
| 13 | | [ Aug 13 21:28:34 Method "start" exited with status 0. ] |