[ Aug 13 21:28:29 Enabled. ]
[ Aug 13 21:28:29 Rereading configuration. ]
[ Aug 13 21:28:30 Rereading configuration. ]
[ Aug 13 21:28:33 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:33.788642826Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:33.794773717Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:33.803344022Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:33.811449005Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:33.816124438Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:34.279884403Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-13T21:28:34.294545708Z","hostname":"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835","pid":22585,"zonename":"\"oxz_crucible_17cef829-6782-473d-8098-6f2cbc061835\""}
[ Aug 13 21:28:34 Method "start" exited with status 0. ]