| 1 | | [ Aug 14 17:42:32 Enabled. ] |
| 2 | | [ Aug 14 17:42:32 Rereading configuration. ] |
| 3 | | [ Aug 14 17:42:35 Rereading configuration. ] |
| 4 | | [ Aug 14 17:42:42 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::a -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-14T17:42:42.750Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService26
|
| 7 | 2026-08-14T17:42:42.756Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService26
|
| 8 | 2026-08-14T17:42:42.763Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-14T17:42:42.767Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-14T17:42:42.770Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService26"
static address = fd00:1122:3344:101::a
|
| 11 | 2026-08-14T17:42:43.224Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-14T17:42:43.230Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_nexus_8c4b3354-dcdc-4698-b642-c4d4172cbd11"
|
| 13 | | [ Aug 14 17:42:43 Method "start" exited with status 0. ] |