[ Aug 17 18:41:00 Enabled. ]
[ Aug 17 18:41:00 Rereading configuration. ]
[ Aug 17 18:41:02 Rereading configuration. ]
[ Aug 17 18:41:07 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.182866656Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.191781544Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.204728872Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.210391768Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.217766931Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.679935279Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T18:41:07.687988189Z","hostname":"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa","pid":24352,"zonename":"\"oxz_crucible_a44f1f0a-8edc-453d-9d10-966d2e4852fa\""}
[ Aug 17 18:41:07 Method "start" exited with status 0. ]