[ Aug 17 20:39:52 Enabled. ]
[ Aug 17 20:39:52 Rereading configuration. ]
[ Aug 17 20:39:54 Rereading configuration. ]
[ Aug 17 20:39:56 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.304428871Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.310416119Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.321511515Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.326068209Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.332222961Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.789229439Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:56.797186292Z","hostname":"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29","pid":24039,"zonename":"\"oxz_crucible_78e7e421-d35d-4718-98d9-8352e2368e29\""}
[ Aug 17 20:39:56 Method "start" exited with status 0. ]